With INGESOA® Airslide Conveyors large quantities of fine-grained bulk solids can be conveyed to a range of locations with a slope of 5º to 12º. Operational costs are minimal.

These square-shaped steel equipments are divided in two chambers by an abrasion resistant, 5 mm thick, polyester membrane (heatproof up to 120ºC). The material being handled travels via the upper chamber and the air circulates in the lower one. The resultant vertical air flow partially supports the bed of particles and the fluidised powder takes on liquid-like properties.

The fluidized material flow can attain, depending on the system size, up to 965 m3/h, although the value of 300 m3/h is usually not exceeded.