INGESOA® Bottom Diverter Valves have been specifically designed to be inserted in airslide conveying lines to divert the flow of material downwards an simultaneously lock the frontal flow.

This type of valves employ the sliding-rotor locking system patented by INGESOA®, which confers the following benefits:

• FULL TIGHTNESS
• COMPACT DESIGN
• MINIMUM MAINTENANCE NEEDS

The flat side of the rotor is permanently aerated to avoid dead zones during conveyance.

Actuators available: manual, pneumatic, motorized.

Independently of the type of drive, INGESOA® Bottom Diverter Valves can be manually operated by means of a clutch.

These valves are provided with a DK-14 position limiter (see brochure F2) connected to the drive shaft to control the position of the rotor.